Short Shifter Kit for Hyundai Veloster N: Install Guide
By Custom Shift Knobs & Interior Mods | Published: 2026-10-27
Category: How-to Guides
Learn how to install a short shifter kit on your 2019+ Hyundai Veloster N. Step-by-step instructions, common mistakes, and tips for a successful upgrade.
Quick answer
Installing a short shifter kit on your 2019+ Hyundai Veloster N reduces throw by 30% and lowers knob height for faster, more engaging gear changes. Follow these steps to get it right the first time.
Why upgrade to a short shifter?
A short shifter kit transforms your connection to the road by reducing the distance your hand travels between gears. The Billetworkz Short Shifter for the 2019+ Hyundai Veloster N is designed specifically for this model, ensuring a precise fit and a track-inspired feel. The result is faster, more confident shifts that make daily driving more enjoyable.
What you need before starting
Gather a flathead screwdriver, a 10mm socket and ratchet, and a torque wrench (if available). The kit includes the short shifter base, shift knob, and necessary hardware. Choose your shift knob shape and color beforehand to match your interior style.
Installation steps
- Remove the stock shift knob: Grip the stock knob firmly and twist counterclockwise until it comes off. If it's stubborn, use a flathead screwdriver to gently pry it loose. Common mistake: twisting too hard can damage the shaft threads. Use steady, even pressure.
- Disconnect the shift boot: Pull the shift boot up and away from the base. It may be held by clips or a plastic ring; gently release them with a flathead screwdriver. Checkpoint: ensure you don't tear the boot. If it's stuck, use a plastic pry tool to avoid damage.
- Remove the stock shifter assembly: Using a 10mm socket, remove the four bolts securing the shifter base to the chassis. Lift the assembly out carefully. Common mistake: losing the bolts or forgetting their orientation. Place them in a safe spot and note which hole they came from.
- Install the short shifter base: Position the new Billetworkz short shifter base over the mounting holes. Hand-tighten the bolts, then torque to 8-10 ft-lbs if using a torque wrench. Checkpoint: ensure the base is aligned correctly before tightening fully. Misalignment can cause binding.
- Attach the shift knob: Thread the new shift knob onto the shifter shaft by hand until snug. Do not overtighten; hand tight is sufficient for a secure fit. Common mistake: overtightening can strip the knob or shaft threads. Stop when you feel resistance.
- Reinstall the shift boot: Slide the shift boot back over the base and secure any clips or rings. Ensure it sits flush and doesn't interfere with shifter movement. Checkpoint: test the shifter through all gears to confirm the boot doesn't bunch up or restrict motion.
Product facts
- Billetworkz Short Shifter w/ Shift Knob – Hyundai Veloster N 2019+: Reduces throw by 30% and lowers the shift knob height for faster, more engaging gear changes. This means less hand movement between gears, making shifts quicker and more precise, especially during spirited driving.
Billetworkz Short Shifter w/ Shift Knob – Hyundai Veloster N 2019+
