Back to Blog
How-to Guides 2026-11-21 Custom Shift Knobs & Interior Mods 0 views

How to Install Your New Shift Boot

How to Install Your New Shift Boot

Learn how to install a custom shift boot from Stitch Boots. This guide covers the simple slip-over process and what to know before you start.

What to Expect from a Stitch Boots Shift Boot

A shift boot is the fabric or leather cover at the base of your gear shifter. Replacing it is one of the quickest ways to refresh your vehicle's interior. Stitch Boots makes custom shift boots from woven canvas fabric, built to match your vehicle's specifications. The Maryland Flag Shift Boot is one example: it's a made-to-order piece that brings a unique, one-of-a-kind pattern to your shifter area.

Installation Steps

The catalog confirms that installation is straightforward: you simply slip the boot over your existing shift boot or use it as a replacement. No special tools or adhesives are required.

  1. 1. Remove the old boot (if applicable): If you are replacing an existing shift boot, gently pull it off the shifter base. The boot is not designed to be cut; it should slide off as one piece.
  2. 2. Align the new boot: Take your Maryland Flag Shift Boot and position it over the shifter base. The woven canvas fabric is flexible enough to stretch slightly over the base without tearing.
  3. 3. Slip the boot into place: Push the boot down until it sits flush against the shifter housing. The boot should cover the base completely and lie flat. There is no adhesive or fastener needed—the fit holds it in place.
  4. 4. Check the fit: Make sure the boot is seated evenly all the way around. If it seems loose, it may not be pushed down fully. The boot is custom-fitted to your vehicle, so the fit should be snug.

What's Included and What's Not

  • Maryland Flag Shift Boot by Stitch Boots: Shift Boot Only - Bracket not included The boot covers the shifter base but does not include a mounting bracket. If your vehicle requires a bracket to secure the boot, you will need to reuse the existing one or purchase it separately.
    Maryland Flag Shift Boot by Stitch Boots
    Maryland Flag Shift Boot by Stitch Boots
  • Maryland Flag Shift Boot by Stitch Boots: Made to Order - Custom fitted to your specific vehicle Because each boot is made to order, the fit is tailored to your vehicle's shifter dimensions. This reduces guesswork and ensures a proper fit out of the box.
  • Maryland Flag Shift Boot by Stitch Boots: Lead Time: 1-2 weeks for made-to-order production Plan ahead: the boot is not shipped from stock. Allow one to two weeks for production before shipping.

A Note on Pattern Variation

The Maryland Flag Shift Boot uses a printed canvas pattern. Because the pattern is printed on fabric, each boot will have a slightly different placement of the flag design. This makes every boot one-of-a-kind. If an exact pattern alignment is important to you, be aware that the print will vary from boot to boot.

Related Articles

Customer Service
Home
Products
Cart
Profile