Billetworkz Titanium Torched E-Brake Button Install
By Custom Shift Knobs & Interior Mods | Published: 2026-10-27
Category: How-to Guides
Learn how to install the Billetworkz Titanium Torched E-Brake Button on Subaru WRX, STI, BRZ, Crosstrek, and Impreza models with this step-by-step guide.
Quick Answer
Swap your factory e-brake button for the Billetworkz Titanium Torched version in about five minutes using a flathead screwdriver and a small pick. The process is the same across WRX, STI, BRZ, Crosstrek, and Impreza models.
Why the Titanium Torched Finish Stands Out
The Billetworkz E-Brake Button is precision CNC-machined from 6Al-4V Grade 5 titanium, then hand-torched at 500+ degrees to create a unique multicolor finish. Because each button is torched individually, no two look exactly alike—minor variations and natural titanium imperfections are part of the appeal.
This is a purely cosmetic upgrade; it does not change how the e-brake functions. If you're looking for a quick, visible interior mod that adds a performance-inspired touch, this button delivers without affecting the mechanism.
Compatibility and Fit Notes
The button fits Subaru WRX, STI, BRZ, Crosstrek, and Impreza models, but the removal method can vary slightly by year and trim. Most factory buttons use a simple release tab that you can access with a small flathead screwdriver, but some models may require a pick to reach it.
If your car has an aftermarket e-brake handle, the release mechanism might be positioned differently. Check the handle's manufacturer instructions before prying—forcing the tab can damage the handle or the new button.
Installation Steps
- Gather Tools and Prepare the Car: You'll need a flathead screwdriver, a small pick or trim tool, and a clean cloth. Park on a level surface and engage the parking brake to keep the handle stable while you work. Make sure the e-brake is engaged so the handle doesn't move during removal.
- Locate the Release Tab on the Factory Button: Look at the underside of the e-brake handle near the button's base. There's a small tab or slot that holds the button in place. Use a flashlight if needed to see it clearly. If you don't see a tab, check for a set screw on the side of the handle—some models use that instead.
- Press the Tab and Slide the Button Off: Insert the flathead screwdriver or pick into the tab and press it inward while pulling the button forward. The button should slide off the handle's shaft without much force. If it resists, re-check the tab position—you might be pressing the wrong part. Never pull hard; if it doesn't slide, you're likely not fully releasing the tab.
- Align the New Billetworkz Button: Slide the new titanium button onto the handle shaft with the logo facing up. It should fit snugly but not require excessive force. Push it until it clicks into place. Make sure the button is fully seated—if it wobbles, remove it and check for debris or misalignment.
- Test the Button and Handle Operation: Release the parking brake, then re-engage it to confirm the button moves smoothly and the handle locks properly. Also test the release action to ensure the button doesn't stick. If the button feels loose or doesn't return smoothly, remove it and reinstall—never drive with a loose e-brake button.
Product Fact
- Billetworkz E-Brake Button – Titanium Torched - Fits Subaru WRX, STI, BRZ, Crosstrek, Impreza: Each button is precision CNC-machined from 6Al-4V Grade 5 titanium and hand-torched at 500+ degrees, creating a one-of-a-kind multicolor finish. The hand-torched process means your button will have a unique color pattern, so you get a custom look that no other car will exactly match.
Billetworkz E-Brake Button – Titanium Torched - Fits Subaru WRX, STI, BRZ, Crosstrek, Impreza
