Alcantara Shift Boot for BRZ, FR-S and 86: Fitment FAQ

By Custom Shift Knobs & Interior Mods | Published: 2026-11-02

Category: Product Reviews

Answers to the most common fitment questions about Alcantara shift boots for the 2013–2021 BRZ, FR-S and 86, including 6-speed compatibility and care.

Quick answer

If you drive a 2013–2021 BRZ, FR-S or 86 with the 6-speed manual, a vehicle-specific Alcantara shift boot is a direct-fit interior upgrade that improves both feel and appearance. The Billetworkz Premium Alcantara Shift Boot is made for this exact application, so you do not need to modify the console or shifter trim.

Why the 6-speed manual matters for fitment

The BRZ, FR-S and 86 were offered with both manual and automatic transmissions, and the shifter surround and boot opening differ between them. A boot designed for the 6-speed manual will not fit the automatic without modification, so confirm your transmission before ordering. The Billetworkz boot is explicitly listed for the 6-speed, which removes the guesswork.

What changes between model years

The 2013–2021 run covers the first-generation car, including the minor interior updates over that period. Because the Billetworkz boot is laser-cut for this specific vehicle range, it follows the factory opening rather than a universal pattern. If your car falls outside 2013–2021, or you have an aftermarket shifter surround, check the opening dimensions before assuming a direct fit.

BRZ, FR-S and 86 shift boot questions answered

Will this boot fit my 2015 FR-S with the 6-speed manual?: Yes. The Billetworkz Premium Alcantara Shift Boot is listed for the 2013–2021 BRZ, FR-S and 86 with the 6-speed manual, so it is a direct fit for your car.
Can I use it on an automatic BRZ or 86?: No. The boot is designed for the 6-speed manual shifter surround. The automatic transmission uses a different console opening, so this boot will not fit without modification. Check your transmission type before ordering.
Does it fit a 2022 or newer BRZ or GR86?: No. This boot is specific to the first-generation 2013–2021 cars. The second-generation BRZ and GR86 use a different interior layout and require a different boot.
Do I need to remove the center console to install it?: Installation typically involves removing the shift knob and the console trim around the shifter to access the boot retaining ring. No cutting or permanent modification is required because the boot is pre-cut for the factory opening. Set aside basic trim removal tools and work slowly to avoid breaking clips.
How do I care for Alcantara?: Alcantara is a suede-like material that should be cleaned with a soft brush and a dedicated Alcantara or mild upholstery cleaner. Avoid soaking it and let it air dry away from direct heat.
Will it work with an aftermarket shift knob?: The boot is designed to fit the factory shifter and shift knob interface. If you have an aftermarket knob with a different base diameter, check that the boot collar still seats properly; some adapters may be needed.

Product facts

Billetworkz Premium Alcantara Shift Boot – BRZ / FR-S / 86 2013-2021 (6-Speed): Constructed from authentic, high-grade Alcantara and laser-cut for precision fitment. Authentic Alcantara gives the race-inspired look and feel buyers expect, while laser cutting means the boot follows the factory opening instead of needing trimming.
Billetworkz Premium Alcantara Shift Boot – BRZ / FR-S / 86 2013-2021 (6-Speed)
Billetworkz Premium Alcantara Shift Boot – BRZ / FR-S / 86 2013-2021 (6-Speed): Reinforced twin-needle stitching. Twin-needle stitching adds durability at the seams, which is where a shift boot sees the most flex over time.
Billetworkz Premium Alcantara Shift Boot – BRZ / FR-S / 86 2013-2021 (6-Speed): Specifically designed for the BRZ / FR-S / 86 2013–2021 with 6-speed manual. Vehicle-specific design removes the need to adapt a universal boot, saving installation time and avoiding a loose or bunched fit.